No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ld show pendinglist

ld show pendinglist


The ld show pendinglist command is used to query the pending list of a logical disk.


ld show pendinglist l=?

ld show pendinglist l=? usermode





l=? Logical ID of a disk.

To obtain the value, run the "ld show disk -app_data" or "ld show disk" command.

  • When this parameter is mandatory, the current command can be used only in the user mode.
  • When this parameter is optional, the current command can be used in both the user mode and kernel mode.

The value is "-app_data", indicating that the command is executed in the user mode.


Diagnostic view

Usage Guidelines

  • Run the "ld show pendinglist l=? -app_data" command to query the pending list of a specified logical disk in the user mode.
  • Run the "ld show pendinglist l=?" command to query the pending list of a specified logical disk in the kernel mode.
  • Run the "ld show pendinglist" command in the user mode when the system supports both the kernel and user modes.


  • Query the pending list of the disk whose logical ID is "33554944".

    admin:/diagnose> ld show pendinglist l=33554944 -app_data
    logicdisk(33554944)'s Pending list num is (0)
  • Query the pending list of the disk whose logical ID is "513".

    admin:/diagnose>ld show pendinglist l=513  
    logicdisk(513)'s Pending list num is (0) 

System Response


Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 725712

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next