No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Advanced O&M Command Reference
OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show dha judgeproportion

show dha judgeproportion


The show dha judgeproportion command is used to query evaluation weights for parameters of the disk health analysis (DHA) model.


show dha judgeproportion




Developer view

Usage Guidelines



Query evaluation weights for parameters of the DHA model.

developer:/>show dha judgeproportion
Master Factor1 : 30
Master Factor2 : 40
Master Factor3 : 30
POH(Power-On Hours) : 100
Duty Cycle : 42
Response Time of Read/Write IO : 58
SATA Raw Read Error Rate : 15
SATA Reallocation Counts : 50
SATA Current Pending Sector : 10
SATA Seek Error Rate : 15
SATA Start Stop Count : 10
SAS(FC/NLSAS) Grown Defect Entries : 43
SAS(FC/NLSAS) Informational Exceptions Log Page : 0
SAS(FC/NLSAS) Read Error Rate : 22
SAS(FC/NLSAS) Total Uncorrected Errors : 26
SAS(FC/NLSAS) Non-medium Error Count : 9

System Response

The following table describes the parameter meanings.



Master Factor1

Master factor 1.

Master Factor2

Master factor 2.

Master Factor3

Master factor 3.

POH(Power-On Hours)

Power On Hour (POH).

Duty Cycle


Response Time of Read/Write IO

Response time.

SATA Raw Read Error Rate

SATA raw read error rate.

SATA Reallocation Counts

Count of SATA remapping.

SATA Current Pending Sector

Number of pending bad sectors of SATA disks.

SATA Seek Error Rate

Seek error rate.

SATA Start Stop Count

Count of start and stop operations.

SAS(FC/NLSAS) Grown Defect Entries

Count of SAS remapping.

SAS(FC/NLSAS) Informational Exceptions Log Page

SAS IE log.

SAS(FC/NLSAS) Read Error Rate

SAS read error rate.

SAS(FC/NLSAS) Total Uncorrected Errors

Total number of unrecoverable errors.

SAS(FC/NLSAS) Non-medium Error Count

Number of non-medium errors.

Updated: 2020-03-19

Document ID: EDOC1000181575

Views: 784483

Downloads: 37

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next