Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change ddp metadata_rebuild
Function
The change ddp metadata_rebuild command is used to set functions related to metadata reconstruction of deduplication.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| lun_id=? | LUN ID. | You can run the "show lun dedup_compress" command to obtain the LUN ID. |
| controller=? | Controller ID. | The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C". |
| action=? | Reconstruction action. | The value can be "start", "stop", or "set_speed", where:
|
| speed=? | Reconstruction speed. | The value can be "normal" or "high", where:
|
Usage Guidelines
- Before running this command, check whether the LUN ID that you want to select is correct.
- When running this command, specify a controller ID.
Previous
