Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change disk_domain_possessed general
Function
The change disk_domain_possessed general command is used to set the possess information about the disk domain.
Format
change disk_domain_possessed general disk_domain_id=? tier_type=? possess_type=? possess_number=?
Parameters
Parameter |
Description |
Value |
|---|---|---|
| disk_domain_id=? | ID of the disk domain whose setting must be changed. | Run the "show disk_domain general" command without any parameters to obtain the value. |
| tier_type=? | Tier type. | The value can be SSD, SAS, or NearLine_SAS. |
| possess_type=? | Sets the possess type. | The value can be page or chunk. |
| possess_number=? | Sets the possess size. | The value can be page or chunk.
|
Usage Guidelines
Before running the command,ensure that services have been stopped.Otherwise, services may be interrupted.
Example
Sets the possess information of the disk domain whose ID is 0.
developer:/>change disk_domain_possessed general disk_domain_id=0 tier_type=SAS possess_type=page possess_number=65536 WARNING:You are about to modify the available cache quantity of disk domain. This operation will cause cache resource to be re-allocated, then system performance may be degraded. Suggestion:Before performing this operation, ensure that the correct parameter is configured. Have you read warning message carefully?(y/n)y Are you sure you really want to perform the operation?(y/n)y Command executed successfully.
Previous
