Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change disk factory_reset
Function
The change disk factory_reset command is used to restore factory defaults for a specified disk.
Parameters
Parameter |
Description |
Value |
---|---|---|
disk_id=? | Disk ID. | To obtain the value, run the "show disk general" command. |
Example
Restore factory defaults for disk "DAE000.0". The command output varies with the product.
developer:/>change disk factory_reset disk_id=DAE000.0 DANGER: You are about to factory reset the specified disk. This operation permanently destroys data on the disk. The data cannot be restored. Suggestion: Before performing this operation, ensure that data on the disk can be deleted. Have you read danger alert message carefully?(y/n)y Enter "I have read and understand the consequences associated with performing this operation." to confirm running this command: I have read and understand the consequences associated with performing this operation. Command executed successfully.