Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show http stat
Function
The show http statcommand is used to view the status of the HTTP service.
Format
show http stat
Parameters
None
Views
Developer view
Usage Guidelines
This command cannot be executed on the CLI to which you log in using the management IP address of the SVP. Before executing this command, use the management IP address to log in to the desired controller.
Example
View the status of the HTTP service.
developer:/>show http stat
HTTP Root Directory : /mnt/OstorVFS/fs0
HTTP Port Enabled : yes
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
HTTP RootDirectory |
Root directory of the HTTP service. |
HTTP Port Enabled |
Whether the HTTP port is enabled,the value is yes or no. |
Previous
