Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mrm showreclaimtask
Parameters
Parameter |
Description |
Value |
|---|---|---|
| poolId | Disk domain ID. | The value ranges from 0 to n minus one, where n indicates the maximum number of disk domains supported by a product. |
Example
View the reclaim task status of disk domain 0.
admin:/diagnose>mrm showreclaimtask -p 0 Disk Domain ID : 0 Begin Time : 2016-03-25 14:50:42 End Time : 2016-03-25 14:50:42 Running : 0 HistoryRun : 1
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
| Disk Domain ID | Disk domain ID. |
| Begin Time | Start time of the reclaim task. |
| End Time | End time of the reclaim task. |
| Running | Is there a reclaim task being performed. |
| HistoryRun | Whether there is a history of reclaim task. |
Previous
