No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show file_system isolate_object

show file_system isolate_object


The show file_system isolate_object command is used to check the object isolate switch.


show file_system isolate_object controller=? file_system_id=? object_id=?





controller=? Indicates the owning controller of the file system.

The value is in the format of XA or XB or XC or XD.X can be 0 to 3.

file_system_id=? File system ID.

The value ranges from 0 to 65535.

object_id=? Object id.

The value ranges from 1 to 230584300921369395.


Developer view

Usage Guidelines

  • Before running this command, check that you have selected the correct file system.
  • You must enter the controller ID, file system ID, and object ID.


To check isolate switch of object.

developer:/show file_system isolate_object controller=0A file_system_id=0 object_id=4002
File System Id : 0
Object ID : 4002                                         
Isolate Switch : TRUE

System Response

The following table describes the parameter meanings.



File System Id

File system ID.

Object ID

Object ID.

Isolate Switch

Isolate switch.

Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 721929

Downloads: 31

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next