Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
lun
This section describes commands related to lun.
- change dedup_lun rescue
- change dif_scan config
- change dif_scan enabled
- change lun
- change lun_background pre_allocate
- change lun_cache force_destage
- change lun_cache refresh
- change lun_crypto_mode
- change lun_defrag general
- change lun_fault_enable
- change lun_fault_page recover
- change lun_grain
- change lun_possessed general
- change lun_reserve clear
- change lun_stat_latency
- change lun_takeover support_multipath
- change lun_work_controller enabled
- change storage_pool repair_dedup_lun
- change touch_lun general
- clear dif_scan general
- clear touch_lun general
- create lun
- create lun_takeover general
- devlun sendlunrecover
- devlun show verifystripeconfig
- devlun show verifystripeinfo
- devlun showbadio
- devlun showcbcnt
- devlun showcmdcbcount
- devlun showctrl
- devlun showdispatchio
- devlun showhanginfo
- devlun showiocount
- devlun showmigedlun
- devlun showpciestate
- devlun showstate
- devlun showstepcount
- devlun showsuspendlist
- devlun showtimeoutio
- devlun showtimerinfo
- devlun showusedlun
- devlun showwritealloclist
- show dedup_lun repair_info
- show dedup_lun rescue
- show dif_scan info
- show dif_scan result
- show lun cache_sequence_flow
- show lun mirror_policy
- show lun zero_data_enabled
- show lun_crypto_mode
- show lun_defrag general
- show lun_fault_enable
- show lun_possessed general
- show lun_reserve general
- show lun_takeover general
- show lun_work_controller enabled
- show touch_lun general
- spacemr showthinrebuildcallstats
- vols showcmdcnt
- vols showtaskcnt
- volume io
- volume itemnum
- volume show verifystripeconfig
- volume show verifystripeinfo
- volume showbadio
- volume showbgnum
- volume showbgswitch
- volume showcowentry
- volume showcreatedvol
- volume showctrl
- volume showentry
- volume showextentid
- volume showflow
- volume showmetacmdcnt
- volume showmetacmdstepcnt
- volume showrealpart
- volume showrescallstats
- volume showresflow
- volume showresformatinfo
- volume showresmem
- volume showresqueue
- volume showresrunning
- volume showresstats
- volume showvoltp