No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add disklog

add disklog

Function

The add disklog command is used to add specified logs of a disk.

Format

add disklog disk_domain_id=? disk_id=? ckg_object_id=? lba=? length=?

Parameters

Parameter

Description

Value

disk_domain_id=?

Disk domain ID.

To obtain the value, run the "show disk_domain general" command in guest view.

disk_id=?

Disk ID.

To obtain the value, run the "pmgr showdisk" command in diagnose in developer view.

ckg_object_id=?

Chunk group ID.

To obtain the value, run the "ckgiof luntrans" command in diagnose in developer view.

lba=?

LBA.

The value must be greater than the starting address and smaller than the ending address of the chunk group in the disk with the unit of sector.

length=?

Log length.

The value must be smaller the size of a chunk in a chunk group with the unit of sector. The size of a chunk is 64 MB.

Views

Developer view

Usage Guidelines

None

Example

To add the logs whose length is "8" and LBA is "7077888" from member disk "522" of CKG "70434275999744" (hexadecimal "400F42004000"), run the following command:

developer:/>add disklog disk_domain_id=0 disk_id=522 ckg_object_id=70434275999744 lba=7077888 length=8 
DANGER: You are going to add a bad block tag. Incorrectly adding such a tag may cause data loss or even host service interruption. 
Suggestion: Before performing this operation, 
1. Check that the member disk to which you will add the tag is normal. 
2. Check whether other member disks have bad block tags. Failures of multiple disks may cause data loss or even service interruption. 
3. Check that the bad sector tag you are going to add is correct and confirm that the tag must be added. 
Have you read danger alert message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully. 
developer:/>

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181575

Views: 647682

Downloads: 30

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next