Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show pal forward_info
Function
The show pal forward_info command is used to query I/O forwarding information.
Format
show pal forward_info [ controller=? ]
Parameters
Parameter |
Description |
Value |
|---|---|---|
controller=? |
Controller ID. |
The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C". |
Views
Developer view
Usage Guidelines
None
Example
Query PAL forwarding counts.
developer:/>show pal forward_info
Send REQ Number : 0
Send REQ Callback Number : 0
Handle Response Number : 0
Remote Reponse Number : 1
Remote Response Callback Number : 1
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
Send REQ Number |
Specifies the REQ sent. |
Send REQ Callback Number |
Specifies the information returned after REQ is sent. |
Handle Response Number |
Specifies the handling response. |
Remote Reponse Number |
Specifies the received remote response. |
Remote Response Callback Number |
Specifies information returned after a remote response is received. |
Previous
