Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
drvunf showdetail
Function
The drvunf showdetail command is used to query the firmware and resource information about a specific Fibre Channel port.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| portid | Port ID. | To obtain the value, run the "drvunf showportinfo" command. |
Example
Query the hardware, firmware, and resource information about port "0" in slot "0" of a Fibre Channel interface module. The output varies depending on product models.
admin:/diagnose>drvunf showdetail 0x110000 Firmware Details: up version detail: (2.0.2.0),(2019-07-05_15:49:39) ucode version detail: (2.0.2.0),(2019-07-05_15:36:52) uboot version detail: (2.0.2.0),(2019-07-05_15:49:39) Hardware version detail: (ioc_v2r1)
Previous
