No relevant resource is found in the selected language.
MENU
Support Documentation
Advanced O&M Command Reference
OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show space apo_entry_info

show space apo_entry_info

Function

The show space apo_entry_info command is used to query an entry from a specified APO object.

Format

show space apo_entry_info object_set_id=? object_id=? name=? controller=?

Parameters

Parameter

Description

Value
object_set_id=? Indicates the object set ID.

The value is the sum of the file system ID and the base object set ID. The base object set ID of the file system is "0x4000000000" (in hexadecimal) = "274877906944" (in decimal). The MOS base object set ID is "0x2000000000" (in hexadecimal) = "137438953472" (in decimal). The DCL base object set ID is "0x5000000000" (in hexadecimal) = "343597383680" (in decimal). For example, if the file system ID is "20", the object set ID of the file system = "0x4000000000" + "20".
object_id=? Indicates the object ID.

The value must be greater than "0", and smaller than "2305843009213693952".
name=? Indicates the entry name.

The value can contain letters, digits, underscores ("_"), and special characters that can be used in file names.
controller=? Indicates the controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".

Views

Developer view

Usage Guidelines

None

Example

To query the entry which key is "qtree" in the object "3" of the object set "274877906944", run the following command.

developer:/>show space apo_entry_info object_set_id=274877906944 object_id=3 name=qtree controller=0A
  
  Key   : qtree                                    
  Value : 4001

System Response

The following table describes the parameter meanings.

Parameter

Meaning
Key

Indicates key of the entry.
Value

Indicates value of the entry.
Translation
简体中文
Download
Updated: 2020-12-07

Document ID: EDOC1000181575

Views: 1033355

Downloads: 50

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next
Enterprise APP

Copyright © 2021 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :