No relevant resource is found in the selected language.
MENU
Support Documentation
Advanced O&M Command Reference
OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
fmt showdomain

fmt showdomain

Function

The fmt showdomain command is used to query formatting information about the specified disk domain.

Format

fmt showdomain -p poolId

Parameters

Parameter

Description

Value
poolId Disk domain ID.

To obtain the value, run the "show disk_domain general" command.

Views

Diagnostic view

Usage Guidelines

None

Example

Query formatting information about the specified disk domain.

admin:/diagnose>fmt showdomain -p 0
disk pool:0 format rate:100 remain time :0
admin:/diagnose>

System Response

The following table describes the parameter meanings.

Parameter

Meaning
disk pool

Disk domain ID.
format rate

Formatting progress.
remain time

Remaining time.
Translation
简体中文
Download
Updated: 2020-12-07

Document ID: EDOC1000181575

Views: 1031635

Downloads: 48

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next
Enterprise APP

Copyright © 2021 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :