Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show nas_log function_debug_info
Function
The show nas_log function_debug_info command is used to query the information of nas_log function debugging.
Parameters
Parameter |
Description |
Value |
---|---|---|
controller=? | Controller ID. | The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C". |