No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show remote_replication last_fail_trace

show remote_replication last_fail_trace

Function

The show remote_replication last_fail_trace command is used to obtain process trace information of the last failure of a specific remote replication.

Format

show remote_replication last_fail_trace pair_id=? [ controller=? ]

Parameters

Parameter

Description

Value

pair_id=?

Remote replication ID.

To obtain the value, run "show remote_replication unified".

controller=?

ID of the controller.

The value is in the format of XA or XB. X is an integer ranging from 0 to the value of the number of controller pairs minus 1.

Views

Developer view

Usage Guidelines

None

Example

Obtain process trace information of the last failure of remote replication "e09796543d250005".

developer:/>show remote_replication last_fail_trace pair_id=e09796543d250005 controller=0B 
Opcode Action ID Start Time Task Name Action Name  
----------------- --------- ----------------------------- --------------------------- ----------------------------------  
OPCODE_START_SYNC 0 2015-05-04/11:26:37 UTC+08:00 MST_AFTER_SLV_TEMP REPTMP_ACTION_RELATION_CHECK  
OPCODE_START_SYNC 1 2015-05-04/11:26:37 UTC+08:00 MST_AFTER_SLV_TEMP REPTMP_ACTION_START_TRANS  
OPCODE_START_SYNC 2 2015-05-04/11:26:37 UTC+08:00 MST_AFTER_SLV_TEMP REPTMP_ACTION_SEND_CMD_TO_SLV  
OPCODE_START_SYNC 3 2015-05-04/11:26:38 UTC+08:00 MST_AFTER_SLV_TEMP REPTMP_ACTION_UPDATE_TRANS  
OPCODE_START_SYNC 4 2015-05-04/11:26:38 UTC+08:00 MST_AFTER_SLV_TEMP REPTMP_ACTION_HANDLE_REP_SVC  
OPCODE_START_SYNC 5 2015-05-04/11:26:38 UTC+08:00 SINGLE_SYNC_MST_PRE_SVC REP_SVC_ACTION_CREATE_LOG  
OPCODE_START_SYNC 6 2015-05-04/11:26:38 UTC+08:00 SINGLE_SYNC_MST_PRE_SVC REP_SVC_ACTION_CLEAR_SYNC_PROGRESS  
OPCODE_START_SYNC 7 2015-05-04/11:26:38 UTC+08:00 CLEAR_SYNC_PROGRESS_ERR_SVC REP_SVC_ACTION_DELETE_LOG  
OPCODE_START_SYNC 8 2015-05-04/11:26:38 UTC+08:00 CLEAR_SYNC_PROGRESS_ERR_SVC REP_SVC_ACTION_TASK_OVER

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Opcode

Operation code.

Action ID

Action ID.

Start Time

Execution start time.

Task Name

Task name.

Action Name

Action name.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181575

Views: 645333

Downloads: 30

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next