No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove hyper_metro_consistency_group member

remove hyper_metro_consistency_group member


The remove hyper_metro_consistency_group member command is used to forcibly remove a pair from a HyperMetro consistency group.


remove hyper_metro_consistency_group member local_pair_id=?





local_pair_id=? Local ID of the HyperMetro pair.

Export the CCDB and check the "local_pair_id" of the HyperMetro pair to be removed.


Developer view

Usage Guidelines

  • Do not use this command without R&D engineers' guidance. This command can be used to remove a HyperMetro pair from a HyperMetro consistency group only when the HyperMetro pair is faulty and cannot be removed from the consistency group in the user view. Do not use this command in other scenarios.
  • This command must be simultaneously executed at both sides.


Forcibly remove HyperMetro pair "0" from a HyperMetro consistency group.

developer:/>remove hyper_metro_consistency_group member local_pair_id=0
DANGER: You are about to forcibly maintain configurations of the HyperMetro consistency group. This operation forcibly removes the pair from the HyperMetro consistency group. 
When a pair cannot be removed from a HyperMetro consistency group normally, you can perform this operation to forcibly remove the pair from the HyperMetro consistency group. 
Suggestion: Before performing this operation, contact R&D engineers and complete all operations under their guidance. In the mean time, ensure that: 
1. No other users are performing configuration operations. 
2. Host I/Os to the member LUNs of the HyperMetro consistency group have been stopped. 
3. The entered parameters are correct.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 728043

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next