No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Advanced O&M Command Reference
OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system task_status

change system task_status


The change system task_status command is used to change the status of the system task.


change system task_status task_name=? status=?





task_name=? Task name.

The value is "bst_restore", which indicates a BST restore task.

status=? Status of the system task.

The value can be "start" or "stop", where:

  • "start": start the system task.
  • "stop": stop the system task.


Developer view

Usage Guidelines

This command can only be executed on the current controller.


change the bst restore task status to start.

developer:/>change system task_status task_name=bst_restore status=start
DANGER: You are going to change the status of the system task.
Suggestion: Before performing this operation, ensure that you know the impact on the system. 
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2020-03-19

Document ID: EDOC1000181575

Views: 784029

Downloads: 37

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next