No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The upgradesystem command is used to upgrade a system when the system fails to be started.






Minisystem mode

Usage Guidelines

Run this command at any node of the engine to complete the upgrade of the engine. Run this command on each engine of multi-engine devices. If a success message is returned for the command execution on each engine, power off and then power on all controllers.


Run the command and type the package name as prompted to upgrade the system.

Storage: minisystem> upgradesystem
Make sure you have uploaded package to /home/permitdir/update_disk
Input package name:STLOSCA0E2.20.01.108.T02.tgz
DANGER: You are going to upgrade the storage system.
Suggestion: After a success message is displayed on the node, power off and then power on the device.
Have you read danger alert message carefully?(y/n)
Are you sure you really want to perform the operation?(y/n)
Begin to distribute and extract the package, please wait.
Distribute successfully.
Begin to upgrade system.
Upgrade successfully.
Please manually power off and then power on all controllers. 

System Response


Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 727869

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next