Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rephc showalltask
Example
Query the running information about all tasks.
admin:/diagnose>rephc showalltask desc taskEngine maxParallel curParallel taskLevel isErrTask taskOpcode curAction subAction notBackChild genTime TASK_LEVEL_0 PAIR 32 0 -- -- -- -- -- -- -- TASK_LEVEL_1 PAIR 32 0 -- -- -- -- -- -- -- TASK_LEVEL_2 PAIR 32 0 -- -- -- -- -- -- -- TASK_LEVEL_3 PAIR 16 0 -- -- -- -- -- -- -- TASK_LEVEL_4 PAIR 16 0 -- -- -- -- -- -- -- TASK_LEVEL_5 PAIR 16 0 -- -- -- -- -- -- --
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
| desc | Description of the output, including the task level and task type. |
| maxParallel | Maximum number of concurrent tasks. |
| curParallel | Number of current concurrent tasks. |
| taskLevel | Task level. |
| taskEngine | Task engine type. |
| isErrTask | Whether it is a troubleshooting task. |
| taskOpcode | Task operation code. |
| curAction | Action execution cursor. |
| subAction | Sub-action execution cursor. |
| notBackChild | Number of sub-tasks that are not returned. |
| genTime | Task generation time. |
Previous
