No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The maint_debug_cli command is used to locate faults onsite and can only be used by administrators.






serial port mode

Usage Guidelines



  • Entering the debugging mode.
    administrator@SMM_3U / # maint_debug_cli  
    Debug Shell  
    Copyright(C) 2013-2018 
  • Saving the current debugging log export mode and level settings and making the settings valid after the BMC is restarted.
    % save 
  • Changing the debugging log export level of an attached module.
  • Connecting to a specified module for follow-up operation.
    % attach ipmi_app 
  • Obtaining help information.
    % help 
    Usage: help 
    Get all command help infomation. 
    Usage: bye 
    Quit maintain debug command line interface. 
    Usage: attach  
    Attach certain module to debug. 
    Usage: regwrite  
    Write value to specified offset in cpld. 
    Usage: regread  
    Read value at specified offset in cpld. 
    Usage: lsmod 
    List all module names. 
  • Exiting the debugging mode.
    % bye 
    Byebye. See you next time.
  • Listing the currently available function modules.
    % lsmod 
    uart Frameboard FileManage cooling MaintDebug MPA_IPMI_APP asd Fru_Fan ipmi_app dfm  
    fault_info Fru_IOCard PowerFru Ear diagnose sysctrl User Upgrade Sensor SMMmgt Led  
    BBU FanCell Board log

System Response


Updated: 2019-07-11

Document ID: EDOC1000181575

Views: 645082

Downloads: 30

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next