clear omnilock brl
Function
The clear omnilock brl command is used to clear information about file range locks.
Format
clear omnilock brl controller=? [ file_system_id=? ] [ file_id=? ] [ range=? ] [ owner=? ]
Parameters
Parameter |
Description |
Value |
|---|---|---|
file_system_id=? |
File system ID. |
The value is a hexadecimal number, ranging from 0 to FFFFFFFF FFFFFFFF. |
file_id=? |
File ID. |
The value is a hexadecimal number, ranging from 0 to FFFFFFFF FFFFFFFF. |
owner=? |
Owner of a range lock. |
The value can be "SMB1", "SMB2", "NFS3", "NFS4", "PIM", or "SCA", where:
|
range=? |
Range of a range lock. |
The value is a decimal number, ranging from 0 to (2^64-1).The value format is "X-Y",for example,"0-100" or "80-90". |
controller=? |
Controller ID. |
The value format is "XA", "XB", "XC", or "XD". "X" is an integer ranging from 0 to 3, for example, "0A" or "1C". |
Views
Developer view
Usage Guidelines
None
Example
Clear information about file range locks.
developer:/>clear omnilock brl controller=0A
WARNING: You are about to run the command of clearing the block range lock. This operation may interrupt NAS services.
Suggestion: Confirm that you need to clear the block range lock.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.
System Response
None
Previous
