Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
uboot0_up
Example
Upgrade the U-Boot.
Hi1710_UBOOT> uboot0_up tftp server IP:192.168.0.2 BMC board IP:192.168.0.1 file name:u-boot.bin TFTP from server 192.168.0.2; our IP address is 192.168.0.1 Filename 'u-boot.bin'. Load address: 0x8b000000 Loading: *############### done Bytes transferred = 215792 (34af0 hex) Un-Protect Flash Bank # 1 During the upgrade, ensure that the PCB is powered on and is not in the reset process, or the upgrade will fail, or even worse, the PCB cannot work normally. erase flash from :40000000 to :4007ffff,please wait a while .... done Erased 4 sectors Copy u-boot to flash,please wait a while 9....8....7....6....5....4....3....2....1....Clean env from flash,please wait a while erase flash from :401e0000 to :401fffff,please wait a while . done Erased 1 sectors Protect Flash Sectors 0-15 in Bank # 1 Success to load u-boot0.please update uboot0 and uboot1 in a uboot update process.