No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ftds getnode

ftds getnode

Function

The ftds getnode command is used to query the information of the FTDS node.

Format

ftds getnode locationID

Parameters

Parameter

Description

Value

locationID FTDS node uniquely identified by the location ID.

Enumeration value of an FTDS node.

Views

Diagnostic view

Usage Guidelines

None

Example

Query the information of the FTDS node whose location ID is 0x0002000b.

 
admin:/diagnose>ftds getnode 0x0002000b
 
----------------------------dump ftds node information:----------------------------
module       : TGT(0xd, switch-1, level-1)
location     : TGT_FTDS_WRITE_ALLOC(0x2000b)
mode         : STAT(1)
trace level  : SUBSYSTEM(1)
stat  level  : SUBSYSTEM(1)
count level  : SUBSYSTEM(1)
switch       : stat-1, trace-1, data-1, count-0
runinfo      : hanged-0, error-0(start-0, end-0, count-0, endWithTime-0, record-0)
call state   : param invalid-0
statCode     : 1(opNum-1)
curStatPage  : 1
opCode-0x00000000:none
stat. sum    : recv-0x0                good-0x0                bad-0x0                averd-0x0                maxd-0x0                sumd-0x0                count-0x0               
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
master page  : recv-0x0                good-0x0                bad-0x0                averd-0x0                maxd-0x0                sumd-0x0                count-0x0               
slave page   : recv-0x0                good-0x0                bad-0x0                averd-0x0                maxd-0x0                sumd-0x0                count-0x0               
history page : recv-0x0                good-0x0                bad-0x0                averd-0x0                maxd-0x0                sumd-0x0                count-0x0               
 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

dump ftds node information

Show FTDS node information.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 731076

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next