No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cliget -f printbios

cliget -f printbios

Function

The cliget -f printbios command is used to view BIOS boot information after the system is reset.

Format

cliget -f printbios

Parameters

None

Modes

serial port mode

Usage Guidelines

None

Example

  • View BIOS boot information. The command output varies depending on a specific product.

    administrator@CTRL_B / $ cliget -f printbios
    sys start end
    Time:1970-1-1 0:5:23
    Loading PEIM at 0xFFF317FC EntryPoint=0xFFF32024
    Register PPI Notify: 7E1F0D85-04FF-4BB2-866A-31A2996A48A8
    Loading PEIM at 0xFFF32D24 EntryPoint=0xFFF32F95
    PCI PreInit Module PciPreInitPeim() Run!
    Pci Command Register 04: 7
    LPC IoBase(0x0210)
    LPC_GEN_DEC4 Register 0x8C: 0x 0
    Current Bios Channel is 0x0
    Power on CPLD Status:
    ADDR 0x 0: 1 55 60 12 90 0 0 0 39 0 3 FF 1 0 0 21
    ADDR 0x 10: 0 0 0 2 0 0 0 0 A 0 0 0 0 0 0 0
    ADDR 0x 20: 1 0 5 0 0 0 0 0 0 0 0 0 0 0 0 0
    ADDR 0x 30: A 0 0 FF FF 1 0 0 0 0 0 0 0 0 0 0
    ADDR 0x 40: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    ADDR 0x 50: 0 0 0 3 0 0 0 0 0 0 0 F 0 0 0 0
    Loading PEIM at 0xFFF335B4 EntryPoint=0xFFF33867
    2000OemBiosInfo is :
    [BiosCrcCheckPei]: Vendor= Huawei
    [BiosCrcCheckPei]: BiosName= Pangea_BIOS
    [BiosCrcCheckPei]: ProductVersion= 10.01.03T06.ME02.01.07.129
    [BiosCrcCheckPei]: UniBiosVersion= V100R015C20B018
    [BiosCrcCheckPei]: BIOSCRCSum= 58E2CAB1
    [BiosCrcCheckPei]: Build Time is 2014-5-5 0:10:58
    [BiosCrcCheckPei]: FVCRCSum1 CRC is [A3CF2151]
    [BiosCrcCheckPei]: FVCRCSum2 CRC is [2A2F92A9]
    [BiosCrcCheckPei]: FVCRCSum3 CRC is [3E309FDA]
    [BiosCrcCheckPei]: ALL FV CRC CRC is [58E2CAB1]
    [SELF_TEST]:Bios CRC Check Success!
  • View BIOS boot information. The command output varies depending on a specific product.

    iBMC:/->cliget -f printbios
     
    sys boot time out
    Time:1970-1-2 14:42:36
    luster 4  CoreID 3 CoreCount = 0x5B ProcessorUid = 0x5B
    GetCoreMbistResult [0xD517:0x0], [0xD51A:0x0]
    DieID = 7 cluster 5  CoreID 0 CoreCount = 0x5C ProcessorUid = 0x5C
    GetCoreMbistResult [0xD517:0x0], [0xD51A:0x0]
    DieID = 7 cluster 5  CoreID 1 CoreCount = 0x5D ProcessorUid = 0x5D
    GetCoreMbistResult [0xD517:0x0], [0xD51A:0x0]
    DieID = 7 cluster 5  CoreID 2 CoreCount = 0x5E ProcessorUid = 0x5E
    GetCoreMbistResult [0xD517:0x0], [0xD51A:0x0]
    DieID = 7 cluster 5  CoreID 3 CoreCount = 0x5F ProcessorUid = 0x5F
    GetCoreMbistResult [0xD517:0x0], [0xD51A:0x0]
    ScclInterleaveEn = 0x1 Socket = 0x2.
    DieID = 9 cluster 0  CoreID 0 CoreCount = 0x60 ProcessorUid = 0x60
    GetCoreMbistResult [0xD532:0x0], [0xD533:0x0]
    DieID = 9 cluster 0  CoreID 1 CoreCount = 0x61 ProcessorUid = 0x61
    GetCoreMbistResult [0xD532:0x0], [0xD533:0x0]
    DieID = 9 cluster 0  CoreID 2 CoreCount = 0x62 ProcessorUid = 0x62
    GetCoreMbistResult [0xD532:0x0], [0xD533:0x0]
    DieID = 9 cluster 0  CoreID 3 CoreCount = 0x63 ProcessorUid = 0x63
    GetCoreMbistResult [0xD532:0x0], [0xD533:0x0]
    DieID = 9 cluster 1  CoreID 0 CoreCount = 0x64 ProcessorUid = 0x64
    GetCoreMbistResult [0xD532:0x0], [0xD533:0x0]
    DieID = 9 cluster 1  CoreID 1 CoreCount = 0x65 ProcessorUid = 0x65
    GetCoreMbistResult [0xD532:0x0], [0xD533:0x0]
    DieID = 9 cluster 1  CoreID 2 CoreCount = 0x66 ProcessorUid = 0x66
    GetCoreMbistResult [0xD532:0x0], [0xD533:0x0]
    DieID = 9 cluster 1  CoreID 3 CoreCount = 0x67 ProcessorUid = 0x67
    GetCoreMbistResult [0xD532:0x0], [0xD533:0x0]
    DieID = 9 cluster 2  CoreID 0 CoreCount = 0x68 ProcessorUid = 0x68
    GetCoreMbistResult [0xD532:0x0], [0xD534:0x0]
    DieID = 9 cluster 2  CoreID 1 CoreCount = 0x69 ProcessorUid = 0x69
    GetCoreMbistResult [0xD532:0x0], [0xD534:0x0]
    DieID = 9 cluster 2  CoreID 2 CoreCount = 0x6A ProcessorUid = 0x6A
    GetCoreMbistResult [0xD532:0x0], [0xD534:0x0]
    DieID = 9 cluster 2  CoreID 3 CoreCount = 0x6B ProcessorUid = 0x6B
    GetCoreMbistResult [0xD532:0x0], [0xD534:0x0]
    DieID = 9 cluster 3  CoreID 0 CoreCount = 0x6C ProcessorUid = 0x6C
    GetCoreMbistResult [0xD532:0x0], [0xD534:0x0]
    DieID = 9 cluster 3  CoreID 1 CoreCount = 0x6D ProcessorUid = 0x6D
    GetCoreMbistResult [0xD532:0x0], [0xD534:0x0]
    DieID = 9 cluster 3  CoreID 2 CoreCount = 0x6E ProcessorUid = 0x6E
    GetCoreMbistResult [0xD532:0x0], [0xD534:0x0]
    DieID = 9 cluster 3  CoreID 3 CoreCount = 0x6F ProcessorUid = 0x6F
    GetCoreMbistResult [0xD532:0x0], [0xD534:0x0]
    DieID = 9 cluster 4  CoreID 0 CoreCount = 0x70 ProcessorUid = 0x70
    GetCoreMbistResult [0xD532:0x0], [0xD535:0x0]
    DieID = 9 cluster 4  CoreID 1 CoreCount = 0x71 ProcessorUid = 0x71
     

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 728603

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next