Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show disk_domain lid_switch
Function
The show disk_domain lid_switch command is used to query the LID function status of a disk domain.
Parameters
Parameter |
Description |
Value |
---|---|---|
disk_domain_id=? | ID of the disk domain whose LID function needs to be enabled or disabled. | To obtain the value, run the "show disk_domain general" command on the CLI. |