No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dpuc_check.sh

dpuc_check.sh

Function

The dpuc_check.sh command is used to run commands related to the communication module.

Format

dpuc_check.sh { -h | -a | -s | -c | -m}

Parameters

Parameter

Description

Value

-h Shows help information.

-

-a Displays functions of each subcommand of the communication module.

-

-c Checks the communication resource of the system control process.

-

-s Checks the communication resource of the service process.

-

-m Checks the communication resource of the device management process.

-

Modes

Minisystem mode

Usage Guidelines

The dpuc_check.sh command is used to check the communication resource of the process. The functions are as follows:

  • Check the communication resource of the service process.
  • Check the communication resource of the system control process.
  • Check the communication resource of the device management process.

Example

Display functions of each subcommand of the module.

Storage: minisystem> dpuc_check.sh    
dpuc_check.sh -s                       : Check whether the memory of the UC communication resource pool occupied by the service process is within the threshold range.
dpuc_check.sh -c                       : Check whether the memory of the UC communication resource pool occupied by the system control process is within the threshold range.
dpuc_check.sh -m                       : Check whether the memory of the UC communication resource pool occupied by the device management process is within the threshold range.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 730652

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next