No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change ftds location

change ftds location

Function

The change ftds location command is used to enable or disable the statistics switch for a specified delay point on a specified controller.

Format

change ftds location location_id=? switch=? controller_id=?

Parameters

Parameter

Description

Value

location_id=?

Location ID of the delay point.

The value can be an unsigned string of 32 integers in hexadecimal format. The string has a prefix in "0x" or "0X" format.

switch=?

Switch of the delay point.

The value can be "on" or "off", where:

  • "on": turns on the FTDS delay point switch.
  • "off": turns off the FTDS delay point switch.

controller_id=?

Controller ID.

The value is in the format of XA, XB, XC, XD, or all. X must be an integer from 0 to 3.

Views

Developer view

Usage Guidelines

None

Example

  • Enabling the statistics switch for the delay point whose location ID is "0x140018" on controller "0A".
    developer:/>change ftds location location_id=0x140018 switch=on controlller_id=0A 
    Command executed successfully.
  • Disabling the statistics switch for the delay point whose location ID is "0x140018" on controller "0A".
    developer:/>change ftds location location_id=0x140018 switch=off controller_id=0A 
    Command executed successfully
  • Enabling the statistics switch for the delay point whose location ID is "0x140018" on all controllers.
    developer:/>change ftds location location_id=0x140018 switch=on controller_id=all 
    Command executed successfully
  • Disabling the statistics switch for the delay point whose location ID is "0x140018" on all controllers.
    developer:/>change ftds location location_id=0x140018 switch=off controller_id=all 
    Command executed successfully

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181575

Views: 641382

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next