No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show root_cause_alarm rule

show root_cause_alarm rule


The show root_cause_alarm rule command is used to view rules defined in a root cause alarm rule table.


show root_cause_alarm rule [ rule_id=? ]





rule_id=? ID of a rule in the root cause alarm rule table.

The value must be an integer from 1 to 400.


Developer view

Usage Guidelines



  • View all root cause alarm rules.

    developer:/>show root_cause_alarm rule
    ID  Child ID        Delay Time   Recover Time   Fathers ID                     Relations                  Switch  Is Default
      --  --------------  -----------  -------------  -----------------------------  -------------------------  ------  ----------
      1   0xF0015001A     120          120            0xF0060004                     (1=3,2=4,5=6,6=7)          on      yes
      2   0xF0015001A     120          120            0xF0D10005                     (0=3,1=4,3=6)              on      yes
      3   0xF0015001A     120          120            0xF0D1000A                     (0=3,1=4,3=6)              on      yes
      4   0x200F00C90115  240          420            0x200F00C90114,0x200F00C90131  (1=2)(3=4)                 on      no
      5   0xF00CF0014     120          120            0xF0CF0006                     (0=0,1=1,2=2)              on      yes
  • View a specific root cause alarm rule.

    developer:/>show root_cause_alarm rule rule_id=4
      ID            : 4
      Child ID      : 0x200F00C90115
      Delay Time    : 240
      Recover Time  : 420
      Fathers ID    : 0x200F00C90114,0x200F00C90131
      Relations     : (1=2)(3=4)
      Switch        : on
      Is Default    : no

System Response

The following table describes the parameter meanings.




Rule ID.

Child ID

Child alarm ID in the rule.

Delay Time

Maximum latency of child alarm suppression in the rule.

Recover Time

Maximum latency of child alarm recovery after parent alarms are cleared.

Fathers ID

List of parent alarm IDs in the rule.


Parent and child alarm association parameter in the rule.


Switch of making an alarm take effect in the rule.

Is Default

Whether the alarm employs the default rule. The default rule cannot be deleted.

Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 719380

Downloads: 31

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next