Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change disk_domain clear_disk
Function
The change disk_domain clear_disk command is used to clear a member disk object of a disk domain.
Parameters
Parameter |
Description |
Value |
---|---|---|
disk_domain_id=? | Disk domain ID. | To obtain the value, run the "show disk_domain general" command in common user mode. |
disk_logic_id=? | Logical disk ID. | To obtain the value, run the "pmgr showdisk" command in debug mode. |
Example
Clear member disk object "512" of disk domain "0".
developer:/>change disk_domain clear_disk disk_domain_id=0 disk_logic_id=512 DANGER: You are going to clear the member disk of disk domain. Suggestion: Before you perform this operation, ensure that the disk is abnormal and have reconstructed finished. Have you read danger alert message carefully?(y/n)y Are you sure you really want to perform the operation?(y/n)y Command executed successfully.