Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
devlun showiocount
Example
View the I/O counts of device LUNs.
admin:/diagnose>devlun showiocount Index Phase Start Back good Back Retry Back bad Not back AvgLatency(ms) MaxLatency(js) ----- --------- ----- --------- ---------- -------- -------- -------------- -------------- 2 LUN_ALLOC_READ_PAGE_BEFORE_SEND 5 5 0 0 0 0 0 3 LUN_HANDLE_SCSI_CMD_LOCAL 0 0 0 0 0 0 0 4 LUN_HANDLE_SCSI_CMD_REMOTE 115716 115716 0 0 0 0 1 5 LUN_QOS_HANDLE 115718 115718 0 0 0 0 1 6 LUN_ALLOC_WRITE_PAGE_WORKCTRL 57867 57867 0 0 0 0 1 7 LUN_ALLOC_WRITE_PAGE_NON_WORKCTRL 0 0 0 0 0 0 0 8 LUN_ALLOC_PAGE_SCSI_PRIVATE_READ_LOCAL 0 0 0 0 0 0 0 9 LUN_ALLOC_PAGE_SCSI_PRIVATE_READ_REMOTE 0 0 0 0 0 0 0 10 LUN_IO_TO_PAIR 115725 115712 0 0 13 0 73 11 LUN_INNER_IO 175860 175856 0 0 4 0 0 12 LUN_IO_TO_CACHE 175855 175854 0 0 1 0 37 13 LUN_CACHE_IO_TO_PAIR 0 0 0 0 0 0 0 14 LUN_IO_BYPASS_TO_VOLUME 0 0 0 0 0 0 0 15 LUN_IO_TO_SPC 0 0 0 0 0 0 0 16 LUN_IO_TO_SPC_SPLIT 0 0 0 0 0 0 0 17 LUN_IO_TO_SPC_RETRY 0 0 0 0 0 0 0 18 LUN_SEND_READ_IO_TO_REMOTE 0 0 0 0 0 0 0 19 LUN_SEND_WRITE_IO_TO_REMOTE 0 0 0 0 0 0 0 20 LUN_SEND_WRITE_ALLOC_IO_TO_REMOTE 0 0 0 0 0 0 0 21 LUN_REMOTE_READ 59307 59304 0 0 3 0 36 22 LUN_REMOTE_SCSI_PRIVATE_READ 0 0 0 0 0 0 0 23 LUN_REMOTE_WRITE_ALLOC 59320 59318 0 0 2 0 35 24 LUN_REMOTE_SCSI_PRIVATE_WRITE_ALLOC 0 0 0 0 0 0 0 25 LUN_REMOTE_WRITE 59309 59308 0 0 1 0 37 26 LUN_REMOTE_SCSI_PRIVATE_WRITE 0 0 0 0 0 0 0 27 LUN_REMOTE_RSS_REPAIR_WRITE 0 0 0 0 0 0 0 28 LUN_REMOTE_PVT_MSG 0 0 0 0 0 0 0 29 LUN_ALLOC_ZERO_PAGE_FOR_SUB_EBS 0 0 0 0 0 0 0 30 LUN_SEND_SCSI_PRIVATE_WRITE_TO_REMOTE 0 0 0 0 0 0 0 31 LUN_SEND_SCSI_PRIVATE_READ_TO_REMOTE 5 5 0 0 0 0 0 32 LUN_SEND_SCSI_PRIVATE_WRITE_ALLOC_TO_REMOTE 0 0 0 0 0 0 0 33 LUN_HANG_LIST_IO 0 0 0 0 0 0 0 34 LUN_SUSPEND_LIST_IO 0 0 0 0 0 0 0 35 LUN_ALLOC_IBD_ERR_NUM 0 0 0 0 0 0 0 36 LUN_SEND_DEL_CMD_TO_REMOTE 0 0 0 0 0 0 0 37 LUN_SEND_RSS_REPAIR_WRITE_TO_REMOTE 0 0 0 0 0 0 0 38 LUN_SEND_FULLCOPY_TO_REMOTE 0 0 0 0 0 0 0 39 LUN_IO_TO_FULLCOPY 0 0 0 0 0 0 0 40 LUN_EXTERN_READ_IO 0 0 0 0 0 0 0 41 LUN_EXTERN_WRITE_ALLOC_IO 0 0 0 0 0 0 0 42 LUN_EXTERN_WRITE_IO 0 0 0 0 0 0 0 43 LUN_ALLOC_PAGE_FOR_INJECT_DIF 0 0 0 0 0 0 0 44 LUN_OVERLOAD_CTRL 121301 121301 0 0 0 0 1 45 LUN_LINK_COMPRESS 0 0 0 0 0 0 0 46 LUN_LINK_DECOMPRESS 0 0 0 0 0 0 0 47 LUN_SEND_ABORT_CMD_REQ_TO_REMOTE 0 0 0 0 0 0 0 48 LUN_SEND_RSP_ABORT_CMD_REQ_TO_NON_WORK 0 0 0 0 0 0 0 49 LUN_SEND_FINISH_ABORT_CMD_REQ_TO_REMOTE 0 0 0 0 0 0 0 50 LUN_SEND_RSP_FINISH_ABORT_CMD_REQ_TO_NON_WORK 0 0 0 0 0 0 0 51 LUN_RECV_ABORT_CMD 0 0 0 0 0 0 0 52 LUN_WRITE_ALLOC_WAIT_WRITE 0 0 0 0 0 0 0 53 LUN_SEND_QUERY_IO_TO_REMOTE 0 0 0 0 0 0 0 54 LUN_ALLOC_QUERY_PAGE_NON_WORKCTRL 0 0 0 0 0 0 0 55 LUN_ALLOC_QUERY_PAGE_WORKCTRL 0 0 0 0 0 0 0
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
| Phase | Phase. |
| Start counter | Number of delivered I/Os. |
| Back good | Number of successful I/Os. |
| Back Bad | Number of failed I/Os. |
| Not back | Number of I/Os that are not returned. |
| AvgLatency(ms) | Average latency (ms). |
| MaxLatency(js) | Maximum latency (jiffies). |
Previous
