Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
volume showflow
Parameters
Parameter |
Description |
Value |
|---|---|---|
| flowid | Flow ID in a volume. | To obtain the value, run volume showflow all. |
| all | To show the information of all flows. | - |
| running | To show the information of running flows. | - |
| error | To show the information of error flows. | - |
Example
Query the information of flow 10.
admin:/diagnose>volume showflow 10 RECOVER_THIN_FAT_VOLUME (Object ID(0x1)) Exec Time Flow Step Result ------------------- ----------------------------------- ------ 2012-10-09 15:47:42 CHECK_AND_RECOVER_COW_VOL OK 2012-10-09 15:47:42 START_ALL_CACHE_EVICT OK 2012-10-09 15:47:42 RECOVER_ALL_ROOT_EXTENT OK 2012-10-09 15:47:42 START_ALL_META_VOL_CACHE_DESTAGE OK 2012-10-09 15:47:42 START_DATA_VOL_L2CACHE_DESTAGE OK 2012-10-09 15:47:42 CREATE_TX_OBJ OK 2012-10-09 15:47:42 REDO_ALL_TX OK 2012-10-09 15:47:42 START_ALL_POOL_VOL_SERVICE OK 2012-10-09 15:47:42 LOAD_ALL_META_PARTITION OK 2012-10-09 15:47:42 RECOVER_ALL_NODE_MANAGER OK 2012-10-09 15:47:42 START_CACHE_ASYNC_PREFETCH OK 2012-10-09 15:47:42 CALLBACK_CONFIG_TASK OK 2012-10-09 15:47:42 VOL_PUBLIC_CMD_TASK_OVER TASK_OVER
