Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change notification driver_dif_err
Function
The change notification driver_dif_err command is used to set the DIF error switch status of the BDM notification driver.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| switch=? | DIF error switch of the BDM notification driver. | The value can be "on" or "off", where:
|
