Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dlm resquerybyhex
Function
The dlm resquerybyhex command is used to query information about a specified DLM lock object.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| type | Resource type. | The value can be "proxy" or "master". |
| resname | Resource name. | To obtain the value, run "show dlm resource_proxy|resource_master controller=?" in the developer mode. |
Example
-
Query information about the proxy object of the DLM lock.
admin:/diagnose> dlm resquerybyhex proxy 0074657374000000000000000000000000000000 Current zone: default zone res:test type:1, res: 0 74657374000000000000000000000000000000 Freezecnt:0 . rsc state:0 resstate:11 reuse:1 . Print Interval Tree 18446603486687556312 start end CM GM GC Max TREE OnwerList 0 100 Write Write 1 100 root abc(W), Resource waitQ: is null -
Query information about the master object of the DLM lock.
root:/diagnose>dlm resquerybyhex master 0074657374000000000000000000000000000000 Current zone: default zone res:test type:1, res: 0 74657374000000000000000000000000000000 rsc state:0 resstate:11 reuse:1 . Print Interval Tree 18446603486687554296 start end CM GM GC Max TREE OnwerList 0 100 Null Write 1 100 root 0, Resource waitQ: is null
Previous
