No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


The command is used to modify the bay_config.ini file, including the enclosure ID, number of controllers, and IP address bytes.

Format { -i BayID | -c ControllerTotal | -t BayType }* [ -n ] [ -l ] [ -s ] [ -d | -a ]





BayID Indicates an enclosure ID.

The value ranges from 0 to 7.

ControllerTotal Indicates the number of clusters.

The value ranges from 1 to 16.

BayType Indicates an enclosure type.

The value can be 0, 1, or 2.

  • 0: disk enclosure with 2.5-inch disks.
  • 1: disk enclosure with 3.5-inch disks.
  • 2: disk enclosure with both 2.5-inch and 3.5-inch disks.
-n Indicates that the enclosure ID is not written to the backplane.This parameter is invalid currently.


-l Indicates that bay_conf.ini is not synchronized to the peer controller.


-s Synchronizes to the second backup point.This parameter is invalid currently.


-d Deletes IP address bytes.


-a Adds default IP address bytes.



Minisystem mode

Usage Guidelines



Modify the bay_config.ini file of local and remote controllers.

Storage: minisystem> -i 0 -c 2 -t 0 -a
Write bay config to startup disk successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 727128

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next