No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change vm_fs general

change vm_fs general

Function

The change vm_fs general command is used to mount/unmount a virtual machine (VM) file system.

Format

change vm_fs general status=? vm_fs_id=?

Parameters

Parameter

Description

Value

status=?

Status of the VM file system.

The value can be "mount" or "umount", where:

  • "mount": mount a VM file system.
  • "umount": unmount a VM file system.

vm_fs_id=?

ID of the VM file system.

To obtain the value, run the "show vm_fs general" command without parameters.

Views

Developer view

Usage Guidelines

OceanStor 2800 V5 (32 GB), 5600 V5 (128 GB), and 5800 V5 (256 GB) do not support this command.

Example

  • Mount a VM file system.
    developer:/>change vm_fs general status=mount vm_fs_id=1 
    Command executed successfully.
  • Unmount a VM file system.
    developer:/>change vm_fs general status=umount vm_fs_id=0 
    DANGER: You are about to umount the file system where the virtual machine resides. This operation may cause data to be lost and the virtual machine to be abnormal. 
    Suggestion: Before performing this operation, ensure that you want to umount the file system where the virtual machine resides. 
    Have you read danger alert message carefully?(y/n)y 
     
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181575

Views: 663161

Downloads: 30

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next