Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change extent fast_init_switch
Function
The change extent fast_init_switch command is used to enable or disable fast initialization.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| fast_init_switch=? | Whether to enable fast initialization. | The value can be "yes" or "no", where:
|
Usage Guidelines
After executing this command on the current controller, log in to other controllers of the storage system and run this command on the controllers one by one.
Example
-
Enable fast initialization.
developer:/>change extent fast_init_switch fast_init_switch=yes DANGER: You are about to enable fast initialization. This operation may affect service performance. Suggestion: Before performing this operation, contact technical support engineers. Have you read danger alert message carefully?(y/n)y Are you sure you really want to perform the operation?(y/n)y Command executed successfully.
-
Disable fast initialization.
developer:/>change extent fast_init_switch fast_init_switch=no Command executed successfully.
