No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Advanced O&M Command Reference
OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ld show phyinfo

ld show phyinfo

Function

The ld show phyinfo command is used to view physical information about disks.

Format

ld show phyinfo l=? [usermode]

Parameters

Parameter

Description

Value

l=? Logical ID of a disk.

The value ranges from 0 to 65,535. To obtain the value, run ld show disk.

usermode This parameter is optional. If it is not specified, kernel state information is queried; if it is specified, it must be added to the end of a command as a suffix to query user state information.

The value can be:

"-app_data": executes the command for the app_data process.

Views

Diagnostic view

Usage Guidelines

None

Example

View physical information about disk 1.

admin:/diagnose>ld show phyinfo l=1
Get logicDisk(1) phyInfo success:type(4),speed(7200),bandwidth(6000),firmware:0003,model:ST2000NM0023,vendor:Seagate size(2),intf type(0),port addr:5E09796503110001

System Response

The following table describes the parameter meanings.

Parameter

Meaning

type

Disk type.

speed

Rotational speed of the disk.

bandwidth

Bandwidth.

firmware

Disk firmware version.

model

Disk model.

vendor

Vendor.

size

Physical size of the disk.

intf type

Interface type of the disk.

port addr

Port address of the disk.

Translation
Download
Updated: 2020-03-19

Document ID: EDOC1000181575

Views: 787134

Downloads: 37

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next