Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
spa queryzoneintier
Function
The spa queryzoneintier command is used to view the zone ID set in a tier of a storage pool.
Parameters
Parameter |
Description |
Value |
---|---|---|
pool id | Disk domain ID. | The ID can be obtained by running the show disk_domain general command in super administrator mode. |
tier id | Tier ID. | The value ranges from 0 to 2. |
Example
View the zone ID set in a tier of a storage pool.
admin:/diagnose>spa queryzoneintier -p 0 -t 1 tier id: 1 zone num: 2 Index Zone ID Tier ID Zone Index Type ------------- ------------- ------------- ------------- ----------------- 0 16386(0x4002) 1 1 0(0:meta 1:data) 1 16393(0x4009) 1 4 1(0:meta 1:data)