Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete hyper_metro_domain db
Function
The delete hyper_metro_domain db command is used to forcibly delete the DB information about a specific HyperMetro domain.
Parameters
Parameter |
Description |
Value |
---|---|---|
local_domain_id=? | Local ID of a HyperMetro domain. | Export the CCDB and check the incorrect local_domain_id. |
Usage Guidelines
- Do not use this command without R&D engineers' guidance. This command can be used to delete HyperMetro domain configurations only when the HyperMetro pair with incorrect DB information cannot be deleted on the CLI. Do not use this command in other scenarios.
- Restart the system after running the commands.
Example
Delete the DB information about the HyperMetro domain whose local ID is 0.
developer:/>delete hyper_metro_domain db local_domain_id=0 DANGER: You are about to forcibly maintain HyperMetro. This operation will cause the corresponding value-added pair to be unavailable. This operation enables you to forcibly delete the configuration information about a single item of HyperMetro if HyperMetro objects cannot be deleted properly. Suggestion: Before performing this operation, contract R&D engineers, perform all procedures under their guidance, and confirm the operation. 1. The system is not configured by other users. 2. Host I/Os of HyperMetro LUNs have been stopped. 3. The parameter values that are entered are correct. Have you read danger alert message carefully?(y/n)y Are you sure you really want to perform the operation?(y/n)y Command executed successfully.