Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
spa querydpsyncinfo
Function
The spa querydpsyncinfo command is used to view synchronization information about a disk pool.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| pool id | Disk domain ID. | The ID can be obtained by running the show disk_domain general command in super administrator mode. |
Example
View synchronization information about disk pool.
admin:/diagnose>spa querydpsyncinfo -p 0 disk pool sync info disk pool id : 0 diskPoolPairNum : 1 diskPoolNodeNum : 2 mgrDPWorkNodeId : 0 mgrDPWorkPairId : 0 recoverBitmap : 0x80000001 offlineBitmap : 0x0 isStopping : not stopping isStopped : not stopped workNodeIdArray : 0 0 0 0 0 0 0 0 subNodeIdArray : 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 onlineNodeBitmap : 0x3 localNodeId : 0 tier(0) cache fault recover info force recover status : 0 need recover status : 0 recovering status : 0 recover times : 0 check no error times : 0 check error times : 0 tier(1) cache fault recover info force recover status : 0 need recover status : 0 recovering status : 0 recover times : 0 check no error times : 0 check error times : 0 tier(2) cache fault recover info force recover status : 0 need recover status : 0 recovering status : 0 recover times : 0 check no error times : 0 check error times : 0
Previous
