Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change file_system isolate_object
Function
The change file_system isolate_object command is used to delete object isolate switch.
Format
change file_system isolate_object isolate_switch=? controller=? file_system_id=? object_id=?
Parameters
Parameter |
Description |
Value |
|---|---|---|
isolate_switch=? |
object isolate switch. |
The value is off. |
controller=? |
Indicates the owning controller of the file system. |
The value is in the format of XA or XB or XC or XD.X can be 0 to 3. |
object_id=? |
Object ID. |
The value ranges from 1 to 230584300921369395. |
file_system_id=? |
File system ID. |
The value ranges from 0 to 65535. |
Views
Developer view
Usage Guidelines
- Before running this command, check that you have selected the correct file system and the correct controller.
- You must enter the controller ID, file system ID, object id.
Example
To delete isolate flag of the object.
developer:/change file_system isolate_object isolate_switch=off controller=0A file_system_id=0 object_id=4002
Command executed successfully.
System Response
None
Previous
