Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
overtime
Function
The overtime command is used to set the timeout period of an SES serial port. If the no input period of the serial port exceeds the timeout period, the serial port is automatically locked. The default timeout period is five minutes. You can set the timeout period to a value ranging from 120 to 2,147,483,647 seconds.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| time | Timeout period of an SES serial port (unit: second). | The value ranges from 120 to 2,147,483,647. A hexadecimal value is also supported. |
Previous
