No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dpuc show listen ip

dpuc show listen ip

Function

The dpuc show listen ip command is used to show information about IP address binding.

Format

dpuc show listen ip

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

Show information about IP address binding.

admin:/diagnose>dpuc show listen ip -sys_app
-----------------------------------------------------------
  IP(CTRL)                        LISTEN_EID
  tcpip://127.0.0.1:30120:0
                                  0xffffffff000c0000
  tcpip://10.48.0.1:30120:0
                                  0xffffffff000c0000
  tcpip://10.49.0.1:30120:0
                                  0xffffffff000c0000
  tcpip://10.50.0.1:30120:0
                                  0xffffffff000c0000
  tcpip://10.51.0.1:30120:0
                                  0xffffffff000c0000
  tcpip://10.52.0.1:30120:0
                                  0xffffffff000c0000
  tcpip://10.53.0.1:30120:0
                                  0xffffffff000c0000
  tcpip://10.54.0.1:30120:0
                                  0xffffffff000c0000
  tcpip://10.55.0.1:30120:0
                                  0xffffffff000c0000
  IP(DATA)                        LISTEN_EID
  roce://10.216.0.1:30120:0
                                  0xffffffff000c0000
  roce://10.216.0.1:30121:1
                                  0xffffffff000c0000
  roce://10.216.0.1:30122:2
                                  0xffffffff000c0000
  roce://10.216.0.1:30123:3
                                  0xffffffff000c0000
  roce://10.216.1.1:30120:0
                                  0xffffffff000c0000
  roce://10.216.1.1:30121:1
                                  0xffffffff000c0000
  roce://10.216.1.1:30122:2
                                  0xffffffff000c0000
  roce://10.216.1.1:30123:3
                                  0xffffffff000c0000
  tcpip://127.127.127.10:11234
                                  0x2620123000c0000
-----------------------------------------------------------
Total listen ip num=18.

System Response

The following table describes the parameter meanings.

Parameter

Meaning

IP(CTRL)

IP address listened on the control plane.

LISTEN_EID

EID for listening to the IP address.

IP(DATA)

IP address listened on the data plane.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 728318

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next