No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mp show pathevent

mp show pathevent

Function

The mp show pathevent command is used to query path events.

Format

mp show pathevent

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

Query path events.

admin:/diagnose>mp show pathevent 
Path Type Status Event Type H:C:T Lun ID Port 
--------- ------ ---------- ----- ------ ----

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Path Type

Path type.

Status

Event status.

Event Type

Event type.

H:C:T

Identifier of hosts, channels, and targets.

Lun ID

LUN ID.

Port

Port.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181575

Views: 641611

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next