No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
poweroff disk

poweroff disk

Function

The poweroff disk command is used to power off the specific hard disk.

Format

poweroff disk disk_id=?

Parameters

Parameter

Description

Value

disk_id=?

ID of the hard disk.

To obtain the value, run "show disk general".

Views

Developer view, Engineer view

Usage Guidelines

Before executing this operation, please guarantee that the data on hard disk has been backed up.

Example

To power off the hard disk whose ID is "DAE000.0", run the following command. The command output varies depending on a specific product.

engineer:/>poweroff disk disk_id=DAE000.0 
DANGER: You are about to power off the disk.  
This operation causes the disk to be unreadable and unwritable for services. If the disk domain where the disk resides is in the reconstruction or degradation state, this operation may cause reconstruction failure, service interruption, and data loss.  
Suggestion: Before performing this operation, check the disk properties and status of the disk domain that houses the disk to avoid reconstruction failure, service interruption and data loss. Back up data before powering off. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181575

Views: 642822

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next