Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cache show dirty bitmap
Function
The cache show dirty bitmap command is used to view information about a specific dirty bitmap of caches.
Parameters
Parameter |
Description |
Value |
---|---|---|
volumeid | Volume ID. | The value ranges from 0 to 2^64 - 1. |
ckgId | Chunk group (CKG) ID. | None. |
lba | Logical block addressing (LBA). | None. |
len | Bitmap length. | None. |