Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
poweroff disk
Parameters
Parameter |
Description |
Value |
|---|---|---|
| disk_id=? | ID of the hard disk. | To obtain the value, run "show disk general". |
Usage Guidelines
Before executing this operation, please guarantee that the data on hard disk has been backed up.
Example
To power off the hard disk whose ID is "DAE000.0", run the following command. The command output varies depending on a specific product.
engineer:/>poweroff disk disk_id=DAE000.0 DANGER: You are about to power off the disk. This operation causes the disk to be unreadable and unwritable for services. If the disk domain where the disk resides is in the reconstruction or degradation state, this operation may cause reconstruction failure, service interruption, and data loss. Suggestion: Before performing this operation, check the disk properties and status of the disk domain that houses the disk to avoid reconstruction failure, service interruption and data loss. Back up data before powering off. Have you read danger alert message carefully?(y/n)y Are you sure you really want to perform the operation?(y/n)y Command executed successfully.
Previous
