Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show omnilock lock_client_stat
Example
To check the status of client locks, run the following command.
developer:/>show omnilock lock_client_stat ---------------Client Base Statistics--------------- Resource Total : 1 Resource Init : 11 Resource Release : 10 Resource Destory : 10 Resource Clear : 0 Magic Error : 0 Type Invalid : 0 ---------------Client Open Lock Statistics--------------- Lock Requst : 42 Update Lock Request : 0 Cancel Lock Request : 0 Unlock Request : 42 Request Response : 42 Request Response OK : 42 Request To Server : 11 Request To Server Error : 0 Request To Server Retry : 0 Request To Server Timeout : 0 Server Response : 11 Server Response Error : 0 Server Response XID Mismatch : 0 Server Response Mode Error : 0 Lease Revoke : 0 Cache Revoke : 0 Revoke Response : 0 Lease Break : 0 Cache Miss : 11 Cache Hit : 31 Lease Downgrade : 0 Recovery Triggered : 0 Recovery Failed : 0 Freeze Triggered : 0 Unfreeze Triggered : 0 Clear Response : 0 Open Node Total : 0 Break Timeout : 0 Break Done : 0 Req Used : 0 RTT Lock : 0/0/0/0 RTT Message : 0/0/0/0 RTT Event Queued : 0/0/0/0 ---------------Client Brl Statistics--------------- Lock Request : 0 Lock Response : 0 Test Lock Request : 4 Test Lock Response : 4 Timout Request : 0 Timout Response : 0 Walk Request : 0 Unlock Request : 0 Cancel Lock Request : 0 Request Response OK : 0 RTT Lock : 0/0/0/0 RTT Test : 0/0/0/0
Previous
