Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show lun zero_data_enabled
Function
The show lun zero_data_enabled command is used to check the status of the zero data check switch in a thin LUN.
Parameters
Parameter |
Description |
Value |
---|---|---|
lun_id=? | ID of a thin LUN. | To obtain the value, run the "show lun general" command. |
Usage Guidelines
Use this command when you want to check the status of the zero data check switch in a thin LUN.